Chris Hammond
Sunday, January 22, 2012 11:59:54 PM

Alright the time has come to part with the parts. I took some time this evening to take photographs of what I have and what I am trying to sell. Right now I am trying to sell everything locally so prices don’t include any shipping. If I don’t have any interest locally I’m willing to ship the coilovers/springs/shocks but only as a package.

Sway bars and the exhaust are way too much of a hassle to try to ship, so those are local only. (Local in the San Francisco Bay Area, if you’re somewhere else in California and want to drive here, feel free).

Cash Only, no checks. Paypal acceptable for a hold, but cash must be delivered in full before handover of the parts. All parts located in Half Moon Bay, contact me at z – at – christoc.com for more info.

All parts are sold as is, with no warranty, and unknown mileage. I can tell you I put about 10k on each of them (except the control arms and the Cobb bar), but am not sure what they had prior to me.

I’m also still selling the 18x10” Enkei RPF1s over on my other post.

350z BSP Suspension $1200

$1200, All four corners, no sway bars.

Front Suspension
TrueChoice Phase 4 coilovers
650lb Hyperco Springs

Rear Suspension
Unknown brand spring perches
Unknown brand 500lb springs
Koni Sport Shocks (standard off the shelf)

350z Suspension For Sale

350z Sway Bars (Hotchkis Front/Rear $200, Cobb Front $125)

$200 Set of Hotchkis Front/Rear Adjustable Sway Bars, no bushings, no end links (I used the stock ones)

$125 Cobb 35mm Front Sway Bar (bushings included, but no end links)

Injen Super SES Dual Exhaust $500

$500 Used exhaust, works and sounds great. Center (longest) pipes are about a year old, replaced with brand new reinforced pipes from Injen. Everything needs a good cleaning, has your usual scrapes from a lowered vehicle, but overall in great shape. No clue on mileage of the other parts. Includes bolts (except for the catalytic converter side) and extra hanger arm to mount on the car, but no rubber hangers

350z Control Arm v2 from SPL Pro Suspension SOLD

SOLD I didn’t use these, they weren’t legal for the class I was running, but I was told they are V2 arms, and that the ball joints needed replaced. You’ll need a nut for the ball joint as well.

 

More photos of the parts at at (http://www.flickr.com/photos/chammond/sets/72157628769483291/)

Views: 1788 Comments: 0
Chris Hammond
Monday, March 28, 2011 1:07:14 AM

So today I went back at the suspension of the car.

Time lapse of lowering the suspension, in reverse

The problem with the video is that I did the time lapse in reverse! I mistakenly sorted the photos in descending order instead of ascending. You really can’t tell on the time lapse though, it just looks like another time lapse!

See the full post for more photos
Views: 1142 Comments: 0
Chris Hammond
Monday, February 21, 2011 12:09:56 AM

So there’s been much debate (or really just many people telling me I am crazy) over on SCCAForums in the thread I started to discuss the proposed move of the 350z from BSP to ESP in SCCA Autocross classing.

Ever since the 350z was released I thought it was the perfect F-Stock car, though others have always seemed to think otherwise and it was relegated to B-Stock where all but a few events it became an also ran behind the RX-8. It was also classed in BSP (b street prepared) where it hasn’t faired any better for the last 8 years. Last month the SCCA posted a proposal to move the 350z from BSP to ESP, I’m all for the move, most of the ESP folk apparently aren’t, “A Japanese car in our American Car Class? How dare you!”

Alright, so no one has made that complaint, but the way they “defend” their ground they might as well be drawing lines in the soil. There’s much debate about what a 350z will actually weight in SP trim, my car isn’t fully SP prepped yet (and to be honest that will likely take 2-3 years due to budget) but I figured I would go ahead and weigh the car at the divisional event today.

First things first, here are the details of the car itself (if it's not mentioned it is stock)
2004 Nissan 350z "Enthusiast" package
18x10" RPF1s
305 V710s
No stereo/speakers
~2 gallons of gas
Injen Super SES dual exhaust (weighed at 15lbs lighter than stock)
HFCs
K&N CAI
Plenum spacer
Hotchkis F/R sway bars
No spare tire, tools, or rear carpeting/mats(not fastened down from the factory)

And what did it weigh in at?

3062lbs

That matches up fairly closely to my 2003 Enthusiast I had from 03-06 in b-stock trim. A few other mods on this one, though the old one had a lighter exhaust setup. The 2003 weighed 3075lbs.

Views: 852 Comments: 0
Chris Hammond
Saturday, February 05, 2011 11:07:21 PM

So now that wheels and tires (used) are taken care of, at least for part of the season, I need to locate some longer/stronger wheel studs for the 350z.

Enkei RPF1 18x10 +38

On my 2003 350z I had Nismo studs, though they were only on the front, I never got around to putting them on the rear. For this one I could go with the Nismo studs, but it appears a lot of people use ARP studs. So I started looking into what was available there.

Views: 1400 Comments: 0
Chris Hammond
Monday, September 27, 2010 1:48:39 AM
So today was the first time I’ve ever autocrossed in California, and the first time the car has seen an event since our runs at the Colorado event in January. I left San Carlos early in the morning and headed off to pick up Will Strohl. We headed down to Marina California for the Northern California United Five-Ten Owners Club
Views: 2474 Comments: 1
RSS URL